Uus tuletõrjeauto Isuzu PICKUP FIRE FIGHTING TRUCK

Chengli Group is the largest special-purpose vehicle manufacturer in China. We can customize ISUZU, FOTON, HOWO, SINO, JAC, SHACMAN, DONGFENG, JMC and other brand trucks according to your needs.
ISUZU 4×4 PICKUP Fire Truck Specifications

Name Water Tank Fire Truck
Model CLW5050GWT
Painting Fire red (RAL 3000)
(Customer LOGO welcome)



Chassis Brand ISUZU
Chassis Model Pickup
Engine power 105KW (143HP)
4X4 Drive, Double Cabin
Outline dimension 5295×2000×2780 mm
Total weight 3295 kg
Number of Seats 2+3 (inc. driver)
Fire-extinguishing Agents Water (L) 1000L



Fire pump Model JBQ4.5/9 （Portable pump）
Max. Pressure (Mpa) ≥0.65 Mpa
Flow (L/s) 600L/min



Fire Monitor Model PS20
Rate (L/s) 20
Throw Range(m) Water ≥ 20
Fire Equipment Factory standard Suction hose, wrench, water filter, water gun




01, Truck Chassis:

Model Parameters others
Chassis ISUZU Pickup
GVW 3295kg
Engine Model 4KH1CT6H1 ISUZU
Engine Power 143 HP
Wheelbase 3406 mm
Driving Type 4x4/ 6 wheels Left hand
Transmission MUA-5T, 5-shift Manual
Emission Standard 2999 ml Euro 6
Passenger No 2+3
Cabin 4 doors, double cabin A/C

02, Water Tank:

Capacity 1000L
Material Carbon steel, Thickness min=4mm
Design Tank is designed that the center of gravity as low as possible.
Structure All metal welding structure, the overall corrosion resistance, have Shock absorption
measures


Equipped 1 suction hole at the rear of pump room
1 overflow valve device
1 drain outlet with ball valve
2 DN65 inlets at both sides, structure: ball valve with inside bend upturning pipeline


03, Fire pump:

Model JBQ4.5/9

Type Portable pump
Rated flow 600L/min
Outlet pressure 0.65 Mpa
Engine model GX390
Exhaust rate 390 ml
Engine speed 3600r/min
Priming time ≤10s

Operation
The operation will be done from the rear of the pump, from rear side of the vehicle




04, Fire monitor:

Model PS20
Type Manual
Rated flow 20 L/S @0.8 Mpa
Angle ≥90
Range ≥ 20m
Rotation angle ≥360

05, Bodywork:




The overall layout The front and two sides of the middle of the body are storage compartments. It
is built-in type independent water tank in the middle position of the central
compartment. The back of the body is pump compartment.
The aluminum alloy shutters are installed at both sides of the body and the
back of the pump compartment, the ladders are installed on the back of the
body at the right side.



Technical requirement All welding panels and skeleton steels are through strict process of anti-rust,
anti-corrosion and phosphating pickling. All the accessories 、standard
components are processed of galvanization 、electroplate 、Decrement
treatments and so on. After completing welding of the tank, the tank will be
clear up and removed possible defects such as empty solder. And then it will be
through 24-hour hydrostatic test to assure no leakage.